In medical settings, the disinfection of reusable plastic devices is crucial to prevent cross-contamination and ensure patient safety. One of the most effective high-level disinfectants used for this purpose is ESLOC-G solution. It is renowned for its broad-spectrum antimicrobial properties, making it ideal for disinfecting instruments that cannot withstand high temperatures—especially plastic devices.

In this blog post, we’ll walk you through how to properly disinfect plastic medical devices using ESLOC-G solution, ensuring safety and efficacy.

Why Use ESLOC-G solution for Disinfection?

ESLOC-G solution is a high-level disinfectant widely used in healthcare for instruments such as: Endoscopes Respiratory therapy equipment Catheters Plastic forceps Proctoscopes and similar devices Key

Advantages:

Effective against bacteria, viruses, fungi, and spores Compatible with most medical-grade plastics Leaves no residue Can be reused for multiple cycles with proper testing Step-by-Step Disinfection Guide for Plastic Medical Devices

1. Pre-clean:

the Devices Before disinfection, it is essential to clean the device thoroughly to remove organic matter such as blood, pus, or tissue. Use an enzymatic detergent or mild cleaning solution. Scrub with a soft brush to reach crevices. Rinse thoroughly with distilled water. Tip: Never skip this step. Organic debris can neutralize disinfectants and reduce efficacy.

2. Prepare the Glutaraldehyde Solution:

Ensure you’re using a ready-to-use ESLOC-G solution, or activate it according to manufacturer instructions if supplied in two parts. Use in a well-ventilated area. Wear protective gloves and eyewear.

3. Immerse the Devices :

Completely Submerge the cleaned plastic medical instruments fully in the Glutaraldehyde solution. Ensure all surfaces are in contact with the liquid. Use a tightly sealed container with a lid to minimize evaporation and fumes.

4. Contact Time:

Allow the device to soak for the manufacturer-recommended time: Minimum 20–30 minutes for high-level disinfection Up to 10 hours if sterilization is desired Do not cut short this time, as it can compromise disinfection.

5. Remove and Rinse :

Thoroughly Once the contact time is complete: Remove the instruments using sterile forceps or gloved hands. Rinse three times with sterile water to remove any chemical residue.

6. Dry and Store:

Dry the disinfected devices with sterile gauze or air-dry in a clean area. Store them in a sterile container or wrap them in autoclave paper if sterility must be maintained.

Safety Tips :

While Using ESLOC-G solution Always use it in a ventilated area to avoid inhalation of fumes. Wear gloves, face masks, and goggles. Follow local regulations for disposal of used solution.

Test the potency of reused solution regularly with a Glutaraldehyde test strip. Conclusion Using ESLOC-G solution to disinfect plastic medical devices ensures a high level of infection control without compromising the integrity of sensitive materials. By following the correct procedure—from cleaning to rinsing—you can safely reuse medical instruments while protecting patients and healthcare staff alike.